FreeSpeak II for Eclipse | User Guide
9.4 FreeSpeak II Transceiver Splitter
Specification Value
Number of Transceivers Supported 10
Number of Splitters Per Card Two
Connection Between Matrix and Splitter 4-pair shielded CAT5 cable with RJ-45
Connection Between Splitter and Transceiver 4-pair shielded CAT5 cable with RJ-45
Powering of Splitter Locally powered using external power supply
9.5 Transmission method
Specifiction Value
Method of RF
Operation
DECT and ISM standards, using two DECT bands per beltpack
Modulation GFSK
Frequencies
of Operation
FSII 1.9 GHz
1880–1900 MHz (Europe)
1920 – 1930 MHz (North America)
FSII 2.4 GHz
2400–2480 MHz (Europe and North America)
Maximum RF
Output
250 mW burst, average level 2 - 4 mW (Europe)
100 mW burst, average level 2 - 4 mW (US)
Theory of
Operation
Dynamic allocation of frequencies and handoff of beltpacks among the
transceivers up to their individual limit of up to 10 connected beltpacks at a
time; each beltpack is assigned a virtual port within the matrix.
9.6 Notice about specifications
While Clear-Com makes every attempt to maintain the accuracy of the information contained in
its product manuals, that information is subject to change without notice. Performance
specifications included in this manual are design-center specifications and are included for
customer guidance and to facilitate system installation. Actual operating performance may vary.
Page 106
To Next Page
Loading...
Need help?
General
