Clear-Com FSII-TCVR-IP-19-US User Manual

FreeSpeak II for Eclipse | User Guide
4. Press the D key on the beltpack to select this option.
5. A confirmation screen will appear. Select Y to confirm.
The system will now be open for registration for 2 minutes.
6. From the beltpack to be registered, follow the registration procedure. See Registering the
beltpack on page 37.
5.15 Performing a site survey
Note: You can only access this option if you have advanced menu access.
You can survey an intercom installation to determine how may FreeSpeak II transceivers are
present. You can do this in two ways:
l
Connecting to a system and detecting all FreeSpeak II transceivers connected to that
system
l
Performing a survey with no system connection. All FreeSpeak II transceivers are
detected regardless of which system they are connected to.
1. To enter the beltpack menu, press and hold the Menu key.
2. Use the rotary and Menu Select keys to select Site Survey.
Page 56

Clear-Com FSII-TCVR-IP-19-US Specifications

General

Brand	Clear-Com
Model	FSII-TCVR-IP-19-US
Category	Intercom System
Language	English