FreeSpeak II for Eclipse | User Guide
The beltpack needs to be previously registered and connected. You need the Menu Access
code, available from Eclipse EHX. (The default code is 4632). To view or change the Menu
Access code select Configuration > Preferences. The following screen appears:
1. From the registered, connected beltpack press and hold the MENU button for 2 seconds to
enter the menu options.î
2. Go to Settings > Admin Options.
3. Enter the Menu Access code using the left and right hand rotary controllers on the beltpack.
If the Menu Access code is successful, the beltpack will display the Enable Pair Mode
screen.
Page 55
To Next Page
Loading...
Need help?
General
