FreeSpeak II for Eclipse | User Guide
Note: You can connect more than one transceiver to the computer if you have multiple USB ports. The
units will be upgraded sequentially.
7.13 Upgrading by wireless connection
1. Right-click on the Frame in the Layout window, and then select Firmware > Update
Firmware. The Update Firmware Wizard appears.
2. Select Next. The following screen appears:
3. Select the Wireless radio button.
4. Select Next, and then browse to the upgrade file (.fww) and select Open. The upgrade
file is loaded to the transceiver, and the transceiver restarts.
You can track the status of the download in the EHX Event Log.
Page 95
To Next Page
Loading...
