Chapter 4: Advanced use
84 Set data limits
the data services you must start a new connection by clicking on the desired
connection on the Dashboard.
To set data limits, do as follows:
4. From the left navigation pane in the ADMINISTRATION page, select
Data limits.
5. Select the services to close automatically after a fixed amount of data or
period of time.
For Standard data type in the number of mega bytes (MB) allowed.
For streaming classes select a period of time from the drop down list.
6. Click Apply to save the settings.
If you set a data limit for the Standard data connection,
automatic activation of the Standard data connections is disabled
for all network user groups.
To Next Page
Loading...
