The coil functions properly only when the coil cable is fully inserted
into the processing unit. To check if the coil is receiving sound signals
from the processor, you can use the in-built coil sensor on the remote
assistant. For more information on how to use the coil sensor, see
Checking the coil.
If you attach the coil to the processing unit when your processor
is turned on, your processor may turn off. If this occurs, turn your
processor back on.
A secure and comfortable fit
For a more secure and comfortable fit, you may want to:
Change the earhook size.•
Adjust the coil magnet strength.•
Change the coil magnet.•
Change the coil cable.•
Use the Mic Lock•
™
.
Use the Snugfit•
™
.
Use the LiteWear cable, which allows the battery module to be •
attached to the body.
Read the following sections for more details.
To Next Page
Loading...
