Using the telephone with your processor
You may use your telephone and your processor with the:
Microphones.•
Telecoil.•
Telecoil and microphones on at the same time.•
When using the telephone, position the telephone so that its earpiece is
aligned with your processor.
Changing loudness of sounds
Microphone sensitivity and volume control the loudness levels of the
sounds you hear.
Depending on how your clinician has set up your programs, you can use
the processor buttons (Advanced user interface only) to:
Change microphone sensitivity only.•
Change volume only.•
The new microphone sensitivity or volume levels you choose will be
saved for each program.
Controlling microphone sensitivity
Microphone sensitivity controls the softest level of sound picked up
by the microphones. If your clinician has enabled you to change the
sensitivity, you can:
Reduce the sensitivity of the sound to reduce background noise in •
noisy situations.
Increase the sensitivity of the sound to hear very soft sounds in •
quiet situations.
If your clinician has enabled the Advanced user interface, you can press
the upper button to increase sensitivity. To decrease sensitivity, press
the lower button. When you change sensitivity level, you see a flash of
green.
To Next Page
Loading...
