Advanced user interface
If your clinician has enabled the Advanced user interface, you can use
your processor buttons to perform the following functions:
Function Button press sequence
Turn your processor on and
off.
Press and hold the upper button
and the lower button at the same
time. Pressing and holding the lower
button only will also turn on the
processor.
Change your program. Press and hold the lower button.
Turn the telecoil/audio
accessory (when connected)
on and off.
Press and hold the upper button.
Lock and unlock processor
buttons.
Press the upper button and the
lower button at the same time.
Adjust volume or sensitivity
level
Press the upper button to increase
volume or sensitivity level.
Press the lower button to decrease
volume or sensitivity level.
Discuss with your clinician which user interface would be more suitable
for you.
To Next Page
Loading...
