Cochlear Nucleus CP810 - Using the Tamper Resistant Earhook

Using the Tamper Resistant Earhook
The Cochlear
™
Nucleus
®
CP800 Series Tamper Resistant Earhook allows
you to lock the earhook to the processing unit. This reduces the risk of
children detaching the earhook from the processing unit.
To attach the tamper resistant earhook:
Attach the tamper resistant 1.
earhook to the processing
unit, ensuring that the
hole on the earhook is
aligned with the hole on
the earhook end of the
processing unit.
Insert the earhook fitting 2.
pin into the hole on the flat
end of the earhook fitting
tool.
Partially insert the earhook 3.
fitting pin into the hole on
the earhook.
Push the earhook fitting pin in with the earhook fitting tool 4.
until the pin is fully inserted. Ensure that the pin does not
protrude from either side of the earhook.
© Cochlear Limited 2010 CP810 Sound Processor User Guide - 41
Wearing your processor