Storing your processor when not in use
Moisture or humidity may cause your processor to cut-out or stop
working.
Store your processor overnight or when you are not using it, in the
Zephyr Dry & Store. The coil, coil cable, coil magnet and battery module
(if it is not being charged) should remain attached to the processing
unit. Turn off your processor before placing it in the Zephyr Dry & Store.
Using the Everyday Case
You can use the Cochlear
™
Nucleus
®
CP800 Series Everyday Case for
carrying your processor with you (e.g. when travelling). It is light and
easy to carry, and has the flexibility to fit all components (e.g. coil,
earhook, etc.). It has an air cushion for holding the components in place.
A desiccant (drying chemical) is provided, allowing the case to be used
as a dry aid kit for removing moisture from your processor.
To Next Page
Loading...
