Cochlear Nucleus CP810 - Locking and Tamper-Resistant Features

Locking and unlocking the LiteWear Cable
You can lock the processing unit and the battery module to the
LiteWear Cable. This reduces the risk of children detaching the battery
module or the processing unit from the LiteWear Cable.
To lock the processing unit to the LiteWear Cable:
Attach the LiteWear Cable 1.
to the processing unit.
Lift the accessory socket 2.
cover on the processing
unit to reveal the lock.
It is located below the
accessory socket.
Using a pair of tweezers 3.
or a screwdriver, push the
latch to the left to lock
the processing unit to the
LiteWear Cable.
To unlock, push the latch to the right.
© Cochlear Limited 2010 CP810 Sound Processor User Guide - 31
Wearing your processor