EasyManua.ls Logo

Cochlear Nucleus CP810 - Changing from an Audio Accessory to Microphones; Changing from Microphones to Audio Accessory

Cochlear Nucleus CP810
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Changing from an audio accessory to microphones
You can change from using an audio accessory to using the
microphones only, while leaving the audio accessory attached.
To change from using an audio accessory to using the microphones,
press the upper button. A single long flash of green confirms that the
microphones are enabled.
Changing from microphones to audio accessory
To change back from using the microphones to using the audio
accessory, press the upper button again. A single long flash of green
confirms that the audio accessory is enabled.
General warnings and precautions for the use of
audio accessories
Always use the Mains Isolation Cable when connecting the •
Personal Audio Cable or the Bilateral Personal Audio Cable to:
A mains powered sound source (e.g. TV).•
A battery powered sound source connected to mains power •
(e.g. while connected to a PC for charging).
The Freedom Accessory Adaptor and the Euro Accessory Adaptor •
are small parts and can be a choking hazard if swallowed. Cochlear
does not recommend the use of these parts by children aged three
years or younger.
When using audio accessories, your processor will not be protected •
from water or dust penetration. For information on how to protect
your processor from water and dust penetration, see Caring for
your processor.
Do not use excessive force when connecting or disconnecting •
audio accessories.
Do not twist the accessory socket cover or pull or bend it too hard.•
74 - CP810 Sound Processor User Guide © Cochlear Limited 2010
Using audio accessories with your processor

Table of Contents

Other manuals for Cochlear Nucleus CP810

Related product manuals