To remove the tamper resistant earhook:
Hold the processor between 1.
the thumb and index finger.
Insert the pointed end of 2.
the earhook fitting tool into
the hole on the earhook.
Push the earhook fitting 3.
tool in to remove the
earhook fitting pin. Do not
use too much force when
pushing the earhook fitting
pin out as it could damage
the earhook fitting tool.
Remove the tamper 4.
resistant earhook by
pushing the lower end of
the earhook towards the
processing unit.
Do not let children attach or remove the tamper resistant earhook
without adult supervision.
To Next Page
Loading...
