Operating the transceiver
72 2110 SSB Transceiver Reference Manual
Editing a self address
To edit a station self address:
1 Press until Main Menu is displayed.
1 Scroll to Control, then press .
1 Scroll to Address, then press .
The number of self addresses in the list is displayed. For example:
1 Press to display the self address/addresses.
If there is more than one self address, scroll to the self address you want to edit.
1 Hold to edit the self address.
The self address is displayed.
1 Edit the self address as required, then press .
The network is displayed.
NOTE For help with entering text see page 52, Entering and editing text.
To Next Page
Loading...
