Operating the transceiver
2110 SSB Transceiver Reference Manual 73
1 Do one of the following:
• to change the network, scroll to the network you want, then press
• to use the self address in all networks, select <all>
• if you do not want to change the network, scroll to the original network, then
press
The new details are saved.
1 Press until Main Menu is displayed.
Deleting a self address
To delete a station self address:
1 Press until Main Menu is displayed.
1 Scroll to Control, then press .
1 Scroll to Address, then press .
The number of self addresses in the list is displayed. For example:
1 Press to display the self address/addresses.
1 Scroll to the self address you want to delete.
1 Hold to open the List Manager.
1 Select Delete item.
To Next Page
Loading...
