Operating the transceiver
2110 SSB Transceiver Reference Manual 81
If you are in the Channel List, the active voice encryptor is indicated by the word
Secure <C|G> highlighted at the left of the channel screen. For example:
Switching off the voice encryptor
To switch off the voice encryptor:
1 Press SEC.
The transceiver will respond with two low short beeps and display Go Clear. For
example:
Using a PIN for additional security
To use the voice encryptor with a PIN:
1 If you are not already using the voice encryptor, press SCAN to switch off scanning.
1 Hold SEC to enter a PIN for the session.
1 Enter the 4-digit PIN that you have agreed to use with others for this session, then
press .
CAUTION
The PIN must be a number that both parties know and agree upon
without mentioning it over the air.