ComAp IM-NTC-BB - Page 296

InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
296
ALARM STATES AND BEHAVIOR OF RELATED OUTPUTS
15.2.1.15 Binary output: SystReady
Related FW
3.0
Description
The output is closed while the group of gen-sets has enough capacity to fulfil
the requested power reserve. If this output is not closed it means the system
has not enough capacity to fulfil the reserve even if all the gen-sets will run.
NOTE:
Fulfiled reserve means the actual reserve is above the requested reserve for
start.