ComAp InteliATS PWR

InteliATS
NT
PWR, SW version 2.5, ©ComAp – May 2015 76
IA-NT- PWR-2.5-Reference Guide.pdf
supposed to be e-mail address and active e-mail is sent. If the value is number, without „@“, it is
supposed to be the telephone number and active SMS is sent.
NOTE:
For GSM numbers use either national format (i.e. like number you will dial if you want to make a local
call) or full international format with "+" character followed by international prefix in the beginning.
This setpoint can be modified from PC only!
SMS Language [1/2]
Select 1 to receive a message in primary controller language or 2 for secondary one.