ComAp InteliDrive Lite Global Guide

ID-FLX Lite & Telecom Global Guide
191
Related FW 2.5.0 Related applications
Comm object 107
Description
Switch display texts between two languages.
Lang selection
6 back to List of LBI
Related FW 2.5.0 Related applications
Comm object 312
Description
Initial condition: Running engine.
Rising edge CONVEYOR (PAGE 191) activates HORN (PAGE 200) for Conveyor horn (page 124). And after
horn is over activates the BO Conveyor.
The second rising edge of CONVEYOR (PAGE 191) opens the BO Conveyor. BO Conveyor is deactivated in
case of Sd protection.
Conveyor
6 back to List of LBI
Related FW 2.5.0 Related applications
Comm object 313
Description
Active input switches the Load limit request to Load request 2 (page 133) setpoint.
LoadRequest2
6 back to List of LBI
Related FW 2.5.0 Related applications
Comm object 314
Description
Active input disables the Load limit PI loop and switches analog output to constant Load Bias (page 132).
LoadRegDisable
6 back to List of LBI
Related FW 2.5.0 Related applications
Comm object 315
Description
Active input switches the Regulator limit request to Request 2 (page 128) setpoint.
RegRequest2

ComAp InteliDrive Lite Specifications

General

Brand	ComAp
Model	InteliDrive Lite
Category	Controller
Language	English