InteliLite4 AMF20 Global Guide
139
Second type of monthly repetition is based on repeating days in week in month.
Image 5.32 Monthly mode – InteliConfig
In timer mode select Repeat. In repetition type select Monthly. In timer settings adjust date and time of first
occurrence of timer. Also adjust the duration of each occurrence of timer. Then select the type of monthly
repetition, the xth week of repetition and days in week. Than select the xth month of repetition.
Example: On image example first start of timer will be 1/1/2016 at 12:00. Duration will be 1 hour. Timer will
be activated again every 2nd week in 2nd month on Monday, Wednesday and Friday at 12:00 for 1 hour.
Set-up via controller interface
There are two types of monthly repetition. The first is based on repeating one day in month.
In controller go to the Scheduler setpoint group. Select the function of timer via Timer 1 Function (page 292)
setpoint. Then go to Timer 1 Setup and press the Enter button. In Timer 1 Repetition (page 294) setpoint
select Repeated mode. Then adjust Timer 1 First Occur. Date (page 293), Timer 1 First Occur. Time
(page 294) and Timer 1 Duration (page 294). In setpoint Timer 1 Repeated (page 295) select Monthly and
adjust type of monthly repetition via Timer 1 Repeat Day (page 295), Timer 1 Refresh Period (page 298)
(xth month of repetition) and Timer 1 Repeat Day In Month (page 296) (concrete day in repeated months).
The second type of monthly repetition is based on repeating on certain days of the week in a month.
In controller go to the Scheduler setpoint group. Select the function of timer via Timer 1 Function (page 292)
setpoint. Then go to Timer 1 Setup and press the Enter button. In Timer 1 Repetition (page 294) setpoint
select Repeated mode. Than adjust Timer 1 First Occur. Date (page 293), Timer 1 First Occur. Time
(page 294) and Timer 1 Duration (page 294). In setpoint Timer 1 Repeated (page 295) select Monthly and
adjust type of monthly repetition via Timer 1 Repeat Day (page 295), Timer 1 Refresh Period (page 298)
(xth month of repetition), Timer 1 Repeated Day In Week (page 296) (days in week when timer is active)
and Timer 1 Repeat Week In Month (page 297) (concrete week in repeated months).
Note: Use the Left and the Right buttons to move between timer setpoints.
To Next Page
Loading...
Need help?
General
