ComAp InteliLite 4 AMF 20

InteliLite4 AMF20 Global Guide
223
Subgroup:Phase Rotation
Phase Rotation
Setpoint group Basic settings Related FW 1.3.0
Range [units] Clockwise / CounterCCW [-]
Default value Clockwise Alternative config NO
Step [-]
Comm object 15122 Related applications AMF,MRS
Config level Advanced
Setpoint visibility All the time
Description
This setpoint adjust the phase sequence of voltage terminals.
6 back to List of setpoints
Subgroup: HMI Settings
Main Screen Line 1
Setpoint group Basic settings Related FW 1.3.0
Range [units] RPM / PF / Run Hours / ATT / AIN1 [-]
Default value PF Alternative config NO
Step [-]
Comm object 13346 Related applications AMF,MRS
Config level Advanced
Setpoint visibility Always
Description
This setpoint adjusts line 1 on Main screen.
6 back to List of setpoints
Main Screen Line 2
Setpoint group Basic settings Related FW 1.3.0
Range [units] RPM / PF / Run Hours / ATT / AIN1 [-]
Default value RPM Alternative config NO
Step [-]
Comm object 14628 Related applications AMF,MRS
Config level Advanced
Setpoint visibility Always
Description
This setpoint adjusts line 2 on Main screen.
6 back to List of setpoints