ComAp InteliLite 4 AMF 20 User Manual

InteliLite4 AMF20 Global Guide
242
Enabled The D+ terminal is used for both functions – “running engine” detection and
charge fail detection.
ChargeFail The D+ terminal is used for charge fail detection only
Disabled The D+ terminal is not used.
Image 8.9 D+ Function 1
Image 8.10 D+ Function 2
Note: Delay of this function is adjusted via D+ Delay (page 243) setpoint, threshold of this function is
adjusted via D+ Level setpoint.
6 back to List of setpoints

ComAp InteliLite 4 AMF 20 Specifications

General

Brand	ComAp
Model	InteliLite 4 AMF 20
Category	Controller
Language	English