InteliLite4 AMF20 Global Guide
326
Subgroup:Fence 1
Fence 1 Protection
Setpoint group Geo-Fencing Related FW 1.3.0
Range [units] HistRecOnl / Wrn / Sd / BOC[-]
Default value HistRecOnl Alternative config NO
Step [-]
Comm object 14610 Related applications AMF,MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
Protection type for geo-fencing 1 protection. Fence of circle area is adjusted by setpoint Fence 1 Radius
(page 327). Delay for protection is adjusted by setpoint Fence 1 Delay (page 327).
HistRecOnl Position of gen-set is only measured and displayed on the LCD screen but not used
for protection. History record is made if position is out of Fence 1 Radius (page
327).
Wrn Position of Gen-set is used for warning protection only. Protection is activated when
position of the Gen-set is out of Fence 1 Radius (page 327).
Sd Position of Gen-set is used for shutdown protection. Protection is activated when
position of the Gen-set is out of Fence 1 Radius (page 327).
BOC Position of Gen-set is used for BOC (Breaker Open and Cooling) protection.
Protection is activated when position of the Gen-set is out of Fence 1 Radius
(page 327).
Protection types
Note: Protection is activated also when GPS signal is lost for Fence 1 Delay (page 327).
6 back to List of setpoints
To Next Page
Loading...
Need help?
General
