InteliLite4 AMF20 Global Guide
330
Description
This setpoint enable or disable module in slot A.
6 back to List of setpoints
Subgroup:Slot B
Slot B
Setpoint group Plug-In Modules Related FW 1.3.0
Range [units] ENABLED / DISABLED [-]
Default value ENABLED Alternative config NO
Step [-]
Comm object 24279 Related applications AMF,MRS
Config level Standard
Setpoint visibility Always
Description
This setpoint enable or disable module in slot B.
6 back to List of setpoints
Group: CM-RS232-485
Subgroup:COM1 Setting
COM1 Mode
Setpoint group CM-RS232-485 Related FW 1.3.0
Range [units] Direct / MODBUS / DualSlave / Dual Master [-]
Default value Direct Alternative config NO
Step [-]
Comm object 24522 Related applications AMF,MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
Communication protocol switch for the COM1 channel.
Direct InteliConfig communication protocol via serial cable.
MODBUS MODBUS protocol.
DualSlave Dual operation protocol – slave function
DualMaster Dual operation protocol – master function
6 back to List of setpoints
To Next Page
Loading...
Need help?
General
