InteliLite4 AMF20 Global Guide
331
COM1 Communication Speed
Setpoint group CM-RS232-485 Related FW 1.3.0
Range [units] 9600 / 19200 / 38400 / 57600 / 115200[bps]
Default value 57600 bps Alternative config NO
Step [-]
Comm object 24341 Related applications AMF,MRS
Config level Standard
Setpoint visibility
Only if relevant module is installed + conditioned by the setpoint COM1 Mode (page
330)
Description
If the direct mode is selected on COM1 channel, the direct communication speed of controller part of line
can be adjusted here. Speed of second part of line has to be adjusted to the same value.
6 back to List of setpoints
COM1 MODBUS Communication Speed
Setpoint group CM-RS232-485 Related FW 1.3.0
Range [units] 9600 / 19200 / 38400 / 57600 / 115200 [bps]
Default value 9600 bps Alternative config NO
Step [-]
Comm object 24477 Related applications AMF,MRS
Config level Standard
Setpoint visibility
Only if relevant module is installed + conditioned by the setpoint COM1 Mode (page
330)
Description
If the MODBUS mode is selected on COM1 channel, the MODBUS communication speed can be adjusted
here.
6 back to List of setpoints
To Next Page
Loading...
Need help?
General
