InteliLite4 AMF20 Global Guide
329
Fence 2 Radius
Setpoint group Geo-Fencing Related FW 1.3.0
Range [units] 0,0..99,9 [km]
Default value 0,0 km Alternative config NO
Step 0,1 km
Comm object 14608 Related applications AMF,MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
Radius for circle area 2. When the Gen-set leaves this area, Fence 2 Protection (page 328) is activated
after Fence 2 Delay (page 329).
Note: The center of this circle area is defined by "Home" position - setpoints Home Longitude (page
325) and Home Latitude (page 324).
6 back to List of setpoints
Fence 2 Delay
Setpoint group Geo-Fencing Related FW 1.3.0
Range [units] 0..3600 [s]
Default value 0 s Alternative config NO
Step 1 s
Comm object 14609 Related applications AMF,MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
Delay for Fence 2 Protection (page 328).
6 back to List of setpoints
Group: Plug-In Modules
Subgroup:Slot A
Slot A
Setpoint group Plug-In Modules Related FW 1.3.0
Range [units] ENABLED / DISABLED [-]
Default value ENABLED Alternative config NO
Step [-]
Comm object 24280 Related applications AMF,MRS
Config level Standard
Setpoint visibility Always
To Next Page
Loading...
