InteliLite4 AMF20 Global Guide
338
Subgroup:TCP/IP Settings
DNS Mode
Setpoint group CM-4G-GPS Related FW 1.3.0
Range [units] Automatic / Manual [-]
Default value Automatic Alternative config NO
Step [-]
Comm object 23988 Related applications AMF,MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
This setpoint enables to enter DNS server addresses manually, even with the Internet Connection (page
333) set to Automatic.
Automatic DNS server addresses automatically obtained from a DHCP server are used
Manual
DNS IP Address 1 (page 338) and DNS IP Address 2 (page 339) can be
adjusted manually. Use this option to resolve e.g. internet access policy related
issue, if local DNS server addresses automatically obtained from a DHCP server
do not work
6 back to List of setpoints
DNS IP Address 1
Setpoint group CM-4G-GPS Related FW 1.3.0
Range [units] Valid IP address [-]
Default value 8.8.8.8 Alternative config NO
Step [-]
Comm object 24314 Related applications AMF,MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
The setpoint is used to select the method how the DNS Address 1 is adjusted.
If DNS Mode (page 338) is MANUAL this setpoint is used to adjust the domain name server (DNS), which
is needed to translate domain names in email addresses and server names into correct IP addresses.
If DNS Mode (page 338) is AUTOMATIC this setpoint is inactive. The DNS server IP address is assigned
by the DHCP server.
6 back to List of setpoints
To Next Page
Loading...
Need help?
General
