InteliLite4 AMF20 Global Guide
339
DNS IP Address 2
Setpoint group CM-4G-GPS Related FW 1.3.0
Range [units] Valid IP address [-]
Default value 8.8.8.8 Alternative config NO
Step [-]
Comm object 23986 Related applications AMF,MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
The setpoint is used to select the method how the DNS Address 2 is adjusted.
If DNS Mode (page 338) is FIXED this setpoint is used to adjust the domain name server (DNS), which is
needed to translate domain names in email addresses and server names into correct IP addresses.
If DNS Mode (page 338) is AUTOMATIC this setpoint is inactive. The DNS server IP address is assigned
by the DHCP server.
6 back to List of setpoints
IP Firewall
Setpoint group CM-4G-GPS Related FW 1.3.0
Range [units] ENABLED / DISABLED [-]
Default value DISABLED Alternative config NO
Step [-]
Comm object 23959 Related applications AMF,MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
This setpoints enables to switch on the built-in Firewall functionality.
DISABLED The firewall function is switched off
ENABLED
The firewall function is switched on, use InteliConfig to setup the firewall rules
(configuration card Others – Firewall)
6 back to List of setpoints
To Next Page
Loading...
Need help?
General
