InteliLite4 AMF20 Global Guide
340
Subgroup:AirGate Settings
AirGate Connection
Setpoint group CM-4G-GPS Related FW 1.3.0
Range [units] Disabled/ Enabled [-]
Default value Enabled Alternative config NO
Step [-]
Comm object 23968 Related applications AMF,MRS
Config level Standard
Setpoint visibility
Only if relevant module is installed + conditioned by the setpoint Internet
Connection (page 333)
Description
This setpoint enable or disable AirGate connection via CM2-4G-GPS.
DISABLED: Only SMS are sent. Internet-enabled SIM card is not required. AirGate is not used.
ENABLED This mode uses the "AirGate" service. Internet-enabled SIM card must be used.
The AirGate server address is adjusted by the setpoint AirGate Address (page
359).
IMPORTANT: When this setpoint is changed the controller has to be restarted to apply
changes.
6 back to List of setpoints
AirGate Address
Setpoint group
CM-4G-GPS; CM-
Ethernet
Related FW 1.3.0
Range [units] [-]
Default value global.airgate.link Alternative config NO
Step [-]
Comm object 24364 Related applications AMF,MRS
Config level Standard
Setpoint visibility
Only if relevant module is installed + conditioned by the setpoint Internet
Connection (page 333)
Description
This setpoint is used for entering the domain name or IP address of the AirGate server. Use the free
AirGate server provided by ComAp at global.airgate.link.
6 back to List of setpoints
To Next Page
Loading...
Need help?
General
