ComAp InteliLite 4 AMF 20 User Manual

InteliLite4 AMF20 Global Guide
359
AirGate Address
Setpoint group
CM-4G-GPS; CM-
Ethernet
Related FW 1.3.0
Range [units] [-]
Default value global.airgate.link Alternative config NO
Step [-]
Comm object 24364 Related applications AMF,MRS
Config level Standard
Setpoint visibility
Only if relevant module is installed + conditioned by the setpoint Internet
Connection (page 333)
Description
This setpoint is used for entering the domain name or IP address of the AirGate server. Use the free
AirGate server provided by ComAp at global.airgate.link.
6 back to List of setpoints
AirGate Port
Setpoint group CM-Ethernet Related FW 1.3.0
Range [units] 1 .. 65535 [-]
Default value 23 Alternative config NO
Step 1
Comm object 23919 Related applications AMF,MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
This port is used for TCP data communication with the AirGate server.
Note: Use port 21, 23 or 6127 for standard ComAp AirGate service.
6 back to List of setpoints

ComAp InteliLite 4 AMF 20 Specifications

General

Brand	ComAp
Model	InteliLite 4 AMF 20
Category	Controller
Language	English