ComAp InteliLite 4 AMF 20

InteliLite4 AMF20 Global Guide
352
Subgroup:GPS Settings
GPS Tracking
Setpoint group CM-4G-GPS Related FW 1.3.0
Range [units] Enabled / Disabled [-]
Default value Enabled Alternative config NO
Step [-]
Comm object 23975 Related applications AMF,MRS
Config level Standard
Setpoint visibility
Only if relevant module is installed + conditioned by the setpoint Internet
Connection (page 333)
Description
If GPS tracking is enabled the module sends position/speed data to the controller with period 10s.
6 back to List of setpoints
Subgroup:RTC Synchronization
NTP Clock Sync
Setpoint group CM-4G-GPS Related FW 1.3.0
Range [units] DISABLED / ENABLED [-]
Default value DISABLED Alternative config NO
Step [-]
Comm object 23964 Related applications AMF,MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
This setpoint is used to enable/disable controller time synchronization with exact time from an NTP server.
6 back to List of setpoints
NTP Server
Setpoint group CM-4G-GPS Related FW 1.3.0
Range [units] [-]
Default value pool.ntp.org Alternative config NO
Step [-]
Comm object 23963 Related applications AMF,MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
NTP server address.
6 back to List of setpoints