InteliLite4 AMF20 Global Guide
356
Gateway IP
Setpoint group CM-Ethernet Related FW 1.3.0
Range [units] Valid IP address [-]
Default value 192.168.1.1 Alternative config NO
Step [-]
Comm object 23948 Related applications AMF,MRS
Config level Standard
Setpoint visibility
Only if relevant module is installed + conditioned by the setpoint IP Address Mode
(page 354)
Description
The setpoint is used to select the method how the Gateway IP is adjusted.
If IP Address Mode (page 354) is MANUAL this setpoint is used to adjust the Subnet Mask. Ask your IT
specialist for help with this setting.
If IP Address Mode (page 354) is AUTOMATIC this setpoint is inactive. The Subnet Mask is assigned by
the DHCP server.
If IP Address Mode (page 354) is DISABLED Ethernet terminal is disabled.
A gateway is a device which connects the respective segment with the other segments and/or Internet.
6 back to List of setpoints
DNS Mode
Setpoint group CM-Ethernet Related FW 1.3.0
Range [units] Automatic / Manual [-]
Default value Automatic Alternative config NO
Step [-]
Comm object 23921 Related applications AMF,MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
This setpoint enables to enter DNS server addresses manually, even with the IP Address Mode (page
354) set to Automatic.
Automatic DNS server addresses automatically obtained from a DHCP server are used
Manual
DNS IP Address 1 (page 357) and DNS IP Address 2 (page 357) can be
adjusted manually. Use this option to resolve e.g. internet access policy related
issue, if local DNS server addresses automatically obtained from a DHCP server
do not work
6 back to List of setpoints
To Next Page
Loading...
Need help?
General
