ComAp InteliLite 4 AMF 20

InteliLite4 AMF20 Global Guide
361
ComAp Client Inactivity Timeout
Setpoint group
CM-Ethernet
CM-4G-GPS
Related FW 1.3.0
Range [units] 0 .. 600 [s]
Default value 60 s Alternative config NO
Step 1 s
Comm object 24098 Related applications AMF,MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
Connection (TCP socket) is closed by controller, if a client (e.g. InteliConfig) does not communicate for this
time. This timeout applies to both direct and AirGate connection.
6 back to List of setpoints
Subgroup:MODBUS Settings
MODBUS Server
Setpoint group CM-Ethernet Related FW 1.3.0
Range [units] DISABLED / ENABLED [-]
Default value Disabled Alternative config NO
Step [-]
Comm object 23937 Related applications AMF,MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
Enable or disable Modbus communication via ethernet interface.
6 back to List of setpoints
MODBUS Client Inactivity Timeout
Setpoint group CM-Ethernet Related FW 1.3.0
Range [units] 0 .. 600 [s]
Default value 60 s Alternative config NO
Step 1 s
Comm object 24097 Related applications AMF,MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
Modbus connection (TCP socket) is closed by controller, if a Modbus client does not communicate for this
time.
6 back to List of setpoints