InteliLite4 AMF20 Global Guide
620
Technical data
Power supply 8 to 36 V DC
Current consumption
0.35-0.1A (+1Amax horn output) depends on supply
voltage
Protection IP65
Humidity 85%
Storage temperature -30 °C to +80 °C
Operating temperature -20 °C to +70 °C
Dimensions (WxHxD) 180 × 120 × 55 mm
Weight 950 g
General data
Maximum current 1.0 A
Maximum switching voltage 36 V DC
Horn output
Galvanic separated
Maximal CAN bus length 200 m
Speed 250 kBd
Nominal impedance 120 Ω
Cable type twisted pair (shielded)
Following dynamic cable parameters are important especially for maximal 200 meters CAN bus length
Nominal Velocity of Propagation min. 75 % (max. 4.4 ns/m)
Wire crosscut min.0.25 mm
2
Maximal attenuation (at 1 MHz) 2dB / 100m
Recommended Industrial Automation & Process Control Cables
BELDEN (www.belden.com)
3082A DeviceBus for Allen-Bradley DeviceNet
3083A DeviceBus for Allen-Bradley DeviceNet
3086A DeviceBus for Honeywell SDS
3087A DeviceBus for Honeywell SDS
3084A DeviceBus for Allen-Bradley DeviceNet
3085A DeviceBus for Allen-Bradley DeviceNet
3105A Paired EIA Industrial RS485 cable
LAPP CABLE (www.lappcable.com)
Unitronic BUS DeviceNet Trunk Cable
Unitronic BUS DeviceNet Drop Cable
Unitronic BUS CAN
Unitronic-FD BUS P CAN UL/CSA
CAN bus interface
6 back to Appendix
To Previous Page
Loading...
