InteliLite Global Guide
280
Setpoint group General Analog Inputs Related FW 1.9.0
Range [units] the range is defined by analog sensor curve
Default value
the value is defined by
analog sensor curve
Alternative config NO
Step the step is defined by analog sensor curve
Comm object 14979 Related applications AMF, MRS
Config level Standard
Setpoint visibility Visible only if the logical binary output AIN SWITCH04 (PAGE 584) is configured
Description
Threshold level for switching the binary output AIN SWITCH 05 (PAGE 661) off. The value is measured from
AIN SWITCH 05 (PAGE 661) analog input.
Image 8.34 General analog input 4 switch
Analog Switch 5 Off
6 back to List of setpoints
General Analog Input 6
Setpoint group General Analog Inputs Related FW 1.9.0
Range [units] the range is defined by analog sensor curve
Default value
the value is defined by
analog sensor curve
Alternative config NO
Step the step is defined by analog sensor curve
Comm object 9274 Related applications AMF, MRS
Config level Standard
Setpoint visibility Visible only if the logical analog input AIN PROT06 (PAGE 645) is configured
Description
Warning or history threshold level for AIN PROT06 (PAGE 645).
Note: These setpoints are used only if LAI AIN PROT06 (PAGE 645) is adjusted to required protection
type. Otherwise these setpoints are useless.
Analog Protection 6 Wrn
6 back to List of setpoints
To Next Page
Loading...
