ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
584
LBO: M
Related FW 1.9.0 Related applications AMF, MRS
Comm object 1258
Description
This output is active when controller is in MAN mode and the engine is stopped and it is possible to start it
i.e. no red alarm is activated or SD OVERRIDE (PAGE 537) is active (Output READY (PAGE 587) is active).
Manual Ready
6 back to Logical binary outputs alphabetically
Related FW 1.9.0 Related applications AMF, MRS
Comm object 19
Description
This output is active whenever the controller is in AUTO mode.
Mode AUTO
6 back to Logical binary outputs alphabetically
Related FW 1.9.0 Related applications AMF, MRS
Comm object 18
Description
This output is active whenever the controller is in MAN mode.
Mode MAN
6 back to Logical binary outputs alphabetically
Related FW 1.9.0 Related applications AMF, MRS
Comm object 17
Description
This output is active whenever the controller is in OFF mode.
Mode OFF
6 back to Logical binary outputs alphabetically
LBO: N
Related FW 1.9.0 Related applications AMF, MRS
Comm object 1248
Description
This output is active when controller isn’t in AUTO mode.
Not In AUTO
6 back to Logical binary outputs alphabetically

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65