ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
311
Setpoint group Scheduler Related FW 1.9.0
Range [units] [-]
Default value [-] Alternative config NO
Step [-]
Comm object 10970 Related applications AMF, MRS
Config level Standard
Setpoint visibility Always
Description
Related setpoints for timer 2 are:
Timer 2 Function (page 310)
Timer 2 Repetition (page 311)
Timer 2 First Occur. Date (page 312)
Timer 2 First Occur. Time (page 312)
Timer 2 Duration (page 312)
Timer 2 Repeated (page 313)
Timer 2 Repeat Day (page 316)
Timer 2 Day (page 315)
Timer 2 Repeated Day In Week (page 316)
Timer 2 Repeat Day In Month (page 316)
Timer 2 Repeat Week In Month (page 317)
Timer 2 Refresh Period (page 314)
Timer 2 Weekends (page 315)
Timer 2 Setup
6 back to List of setpoints
Setpoint group Scheduler Related FW 1.9.0
Range [units] Off / Once / Repeated [-]
Default value Off Alternative config NO
Step [-]
Comm object 0 Related applications AMF, MRS
Config level Standard
Setpoint visibility Conditioned by the setpoint Timer 2 Function (page 310)
Description
Defines repetition of Timer 2 Function (page 310).
Off Timer 2 Function (page 310) will not be activated.
Once Timer 2 Function (page 310) will be activated only one time.
Repeated Timer 2 Function (page 310) will be repeatedly activated.
Timer 2 Repetition
6 List of setpoints (page 170)

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65