ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
346
Setpoint group CM-RS232-485 Related FW 1.9.0
Range [units] 9600 / 19200 / 38400 / 57600 / 115200 [bps]
Default value 9600 bps Alternative config NO
Step [-]
Comm object 24420 Related applications AMF, MRS
Config level Standard
Setpoint visibility
Only if relevant module is installed + conditioned by the setpoint COM2 Mode (page
345)
Description
If the MODBUS mode is selected on COM2 channel, the MODBUS communication speed can be adjusted
here.
COM2 MODBUS Communication Speed
6 List of setpoints (page 170)
Group: CM-GPRS
Setpoint group
CM-GPRS; CM-4G-
GPS
Related FW 1.9.0
Range [units] Email+SMS / SMS Only [-]
Default value Email+SMS Alternative config NO
Step [-]
Comm object 24315 Related applications AMF, MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
This setpoint adjust the communication mode of module.
Email+SMS
Controller is connected to the Internet and is able to send e-mails as well as SMS. The
controller is also accessible via AirGate. Internet-enabled SIM card must be used. Also
APN Name (page 360) has to be adjusted.
SMS Only Only SMS are sent. Internet-enabled SIM card is not required.
IMPORTANT: When this setpoint is changed the controller has to be restarted to apply
changes.
Internet Connection
6 List of setpoints (page 170)

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65