ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
359
Group: CM-4G-GPS
Setpoint group
CM-GPRS; CM-4G-
GPS
Related FW 1.9.0
Range [units] Email+SMS / SMS Only [-]
Default value Email+SMS Alternative config NO
Step [-]
Comm object 24315 Related applications AMF, MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
This setpoint adjust the communication mode of module.
Email+SMS
Controller is connected to the Internet and is able to send e-mails as well as SMS. The
controller is also accessible via AirGate. Internet-enabled SIM card must be used. Also
APN Name (page 360) has to be adjusted.
SMS Only Only SMS are sent. Internet-enabled SIM card is not required.
IMPORTANT: When this setpoint is changed the controller has to be restarted to apply
changes.
Internet Connection
6 List of setpoints (page 170)
Setpoint group CM-4G-GPS Related FW 1.9.0
Range [units] 2G/3G/4G/Automatic [-]
Default value Automatic Alternative config NO
Step [-]
Comm object 24132 Related applications AMF, MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
This setpoint adjusts preferred connection type of CM-4G-GPS module.
Required Connection Type
6 back to List of setpoints

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65