ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
624
Related FW 1.9.0 Related applications AMF, MRS
Comm object 209
Description
Logical analog input designed for general value received from analog sensor. For more information about
wiring of analog inputs see Analog inputs on page 40. This analog input controls logical binary output AIN
SWITCH01 (PAGE 553). The behavior of the switch depends on the adjustment of the setpoints Analog
Switch 1 On (page 243) and Analog Switch 1 Off (page 244).
Note: This function is not suitable for tristate or binary analog sensors.
IMPORTANT: This analog input has no protection. Input is designed only to control
appropriate logical binary output.
AIN Switch 01
6 back to Logical analog inputs alphabetically
Related FW 1.9.0 Related applications AMF, MRS
Comm object 210
Description
Logical analog input designed for general value received from analog sensor. For more information about
wiring of analog inputs see Analog inputs on page 40. This analog input controls logical binary output AIN
SWITCH02 (PAGE 553). The behavior of the switch depends on the adjustment of the setpoints Analog
Switch 2 On (page 246) and Analog Switch 2 Off (page 247).
Note: This function is not suitable for tristate or binary analog sensors.
IMPORTANT: This analog input has no protection. Input is designed only to control
appropriate logical binary output.
AIN Switch 02
6 back to Logical analog inputs alphabetically
Related FW 1.9.0 Related applications AMF, MRS
Comm object 211
Description
Logical analog input designed for general value received from analog sensor. For more information about
wiring of analog inputs see Analog inputs on page 40. This analog input controls logical binary output AIN
SWITCH03 (PAGE 554). The behavior of the switch depends on the adjustment of the setpoints Analog
Switch 3 On (page 249) and Analog Switch 3 Off (page 250).
Note: This function is not suitable for tristate or binary analog sensors.
IMPORTANT: This analog input has no protection. Input is designed only to control
appropriate logical binary output.
AIN Switch 03
6 back to Logical analog inputs alphabetically

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65