ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
625
Related FW 1.9.0 Related applications AMF, MRS
Comm object 212
Description
Logical analog input designed for general value received from analog sensor. For more information about
wiring of analog inputs see Analog inputs on page 40. This analog input controls logical binary output AIN
SWITCH04 (PAGE 554). The behavior of the switch depends on the adjustment of the setpoints Analog
Switch 4 On (page 252) and Analog Switch 4 Off (page 253).
Note: This function is not suitable for tristate or binary analog sensors.
IMPORTANT: This analog input has no protection. Input is designed only to control
appropriate logical binary output.
AIN Switch 04
6 back to Logical analog inputs alphabetically
Related FW 1.9.0 Related applications AMF, MRS
Comm object 278
Description
Logical analog input designed for general value received from analog sensor. For more information about
wiring of analog inputs see Analog inputs on page 40. This analog input controls logical binary output AIN
SWITCH05 (PAGE 555). The behavior of the switch depends on the adjustment of the setpoints Analog
Switch 5 On (page 255) and Analog Switch 5 Off (page 256).
Note: This function is not suitable for tristate or binary analog sensors.
IMPORTANT: This analog input has no protection. Input is designed only to control
appropriate logical binary output.
AIN Switch 05
6 back to Logical analog inputs alphabetically
Related FW 1.9.0 Related applications AMF, MRS
Comm object 279
Description
Logical analog input designed for general value received from analog sensor. For more information about
wiring of analog inputs see Analog inputs on page 40. This analog input controls logical binary output AIN
SWITCH06 (PAGE 555). The behavior of the switch depends on the adjustment of the setpoints Analog
Switch 6 On (page 258) and Analog Switch 6 Off (page 259).
Note: This function is not suitable for tristate or binary analog sensors.
IMPORTANT: This analog input has no protection. Input is designed only to control
appropriate logical binary output.
AIN Switch 06
6 back to Logical analog inputs alphabetically

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65