ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
626
Related FW 1.9.0 Related applications AMF, MRS
Comm object 280
Description
Logical analog input designed for general value received from analog sensor. For more information about
wiring of analog inputs see Analog inputs on page 40. This analog input controls logical binary output AIN
SWITCH07 (PAGE 556). The behavior of the switch depends on the adjustment of the setpoints Analog
Switch 7 On (page 261) and Analog Switch 7 Off (page 262).
Note: This function is not suitable for tristate or binary analog sensors.
IMPORTANT: This analog input has no protection. Input is designed only to control
appropriate logical binary output.
AIN Switch 07
6 back to Logical analog inputs alphabetically
Related FW 1.9.0 Related applications AMF, MRS
Comm object 281
Description
Logical analog input designed for general value received from analog sensor. For more information about
wiring of analog inputs see Analog inputs on page 40. This analog input controls logical binary output AIN
SWITCH08 (PAGE 556). The behavior of the switch depends on the adjustment of the setpoints Analog
Switch 8 On (page 264) and Analog Switch 8 Off (page 265).
Note: This function is not suitable for tristate or binary analog sensors.
IMPORTANT: This analog input has no protection. Input is designed only to control
appropriate logical binary output.
AIN Switch 08
6 back to Logical analog inputs alphabetically
Related FW 1.9.0 Related applications AMF, MRS
Comm object 282
Description
Logical analog input designed for general value received from analog sensor. For more information about
wiring of analog inputs see Analog inputs on page 40. This analog input controls logical binary output AIN
SWITCH09 (PAGE 557). The behavior of the switch depends on the adjustment of the setpoints Analog
Switch 9 On (page 267) and Analog Switch 9 Off (page 268).
Note: This function is not suitable for tristate or binary analog sensors.
IMPORTANT: This analog input has no protection. Input is designed only to control
appropriate logical binary output.
AIN Switch 09
6 back to Logical analog inputs alphabetically

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65