ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
627
Related FW 1.9.0 Related applications AMF, MRS
Comm object 283
Description
Logical analog input designed for general value received from analog sensor. For more information about
wiring of analog inputs see Analog inputs on page 40. This analog input controls logical binary output AIN
SWITCH10 (PAGE 557). The behavior of the switch depends on the adjustment of the setpoints Analog
Switch 10 On (page 270) and Analog Switch 10 Off (page 271).
Note: This function is not suitable for tristate or binary analog sensors.
IMPORTANT: This analog input has no protection. Input is designed only to control
appropriate logical binary output.
AIN Switch 10
6 back to Logical analog inputs alphabetically
Related FW 1.9.0 Related applications AMF, MRS
Comm object 284
Description
Logical analog input designed for general value received from analog sensor. For more information about
wiring of analog inputs see Analog inputs on page 40. This analog input controls logical binary output AIN
SWITCH11 (PAGE 558). The behavior of the switch depends on the adjustment of the setpoints Analog
Switch 11 On (page 273) and Analog Switch 11 Off (page 274).
Note: This function is not suitable for tristate or binary analog sensors.
IMPORTANT: This analog input has no protection. Input is designed only to control
appropriate logical binary output.
AIN Switch 11
6 back to Logical analog inputs alphabetically
Related FW 1.9.0 Related applications AMF, MRS
Comm object 285
Description
Logical analog input designed for general value received from analog sensor. For more information about
wiring of analog inputs see Analog inputs on page 40. This analog input controls logical binary output AIN
SWITCH12 (PAGE 558). The behavior of the switch depends on the adjustment of the setpoints Analog
Switch 12 On (page 276) and Analog Switch 12 Off (page 277).
Note: This function is not suitable for tristate or binary analog sensors.
IMPORTANT: This analog input has no protection. Input is designed only to control
appropriate logical binary output.
AIN Switch 12
6 back to Logical analog inputs alphabetically

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65