ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
628
Related FW 1.9.0 Related applications AMF, MRS
Comm object 286
Description
Logical analog input designed for general value received from analog sensor. For more information about
wiring of analog inputs see Analog inputs on page 40. This analog input controls logical binary output AIN
SWITCH13 (PAGE 559). The behavior of the switch depends on the adjustment of the setpoints Analog
Switch 13 On (page 279) and Analog Switch 13 Off (page 280).
Note: This function is not suitable for tristate or binary analog sensors.
IMPORTANT: This analog input has no protection. Input is designed only to control
appropriate logical binary output.
AIN Switch 13
6 back to Logical analog inputs alphabetically
Related FW 1.9.0 Related applications AMF, MRS
Comm object 287
Description
Logical analog input designed for general value received from analog sensor. For more information about
wiring of analog inputs see Analog inputs on page 40. This analog input controls logical binary output AIN
SWITCH14 (PAGE 559). The behavior of the switch depends on the adjustment of the setpoints Analog
Switch 14 On (page 282) and Analog Switch 14 Off (page 283).
Note: This function is not suitable for tristate or binary analog sensors.
IMPORTANT: This analog input has no protection. Input is designed only to control
appropriate logical binary output.
AIN Switch 14
6 back to Logical analog inputs alphabetically
Related FW 1.9.0 Related applications AMF, MRS
Comm object 288
Description
Logical analog input designed for general value received from analog sensor. For more information about
wiring of analog inputs see Analog inputs on page 40. This analog input controls logical binary output AIN
SWITCH15 (PAGE 560). The behavior of the switch depends on the adjustment of the setpoints Analog
Switch 15 On (page 285) and Analog Switch 15 Off (page 286).
Note: This function is not suitable for tristate or binary analog sensors.
IMPORTANT: This analog input has no protection. Input is designed only to control
appropriate logical binary output.
AIN Switch 15
6 back to Logical analog inputs alphabetically

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65