InteliLite
NT
– AMF20/25, SW version 1.2, ©ComAp – March 2008 28
IL-NT-AMF-Reference Guide1.2.pdf
Analog outputs
Optional plug in card IL-NT AOU8 provides eigth Pulse-With-Modulation (PWM) outputs. These are
intended to drive VDO style analog gauges. This is to provide visual indication of typically ECU values
without installing aditional sensors on the engine. PWM signal emulates sensor which would be
typically mounted on the engine.
Any value from controler may be configured to the outputs. Use LiteEdit PC SW to configure
coresponding sensor/gauge curve and value selection.
To Next Page
Loading...
Need help?
General
