ComAp InteliLite NT AMF Series User Manual

InteliLite
NT
– AMF20/25, SW version 1.2, ©ComAp – March 2008 72
IL-NT-AMF-Reference Guide1.2.pdf
History file
InteliLite NT stores a record of each important event into the history file. The history file seats 117
records. When the history file is full, the oldest records are removed.
Hint
:
To force history download in LiteEdit (direct,,modem or Internet) open History window and select
History | Read history command.
Record structure
Abbreviation Historical value
Num Number of historical event
Reason Event specification
Date Date of historical event in format DD/MM/YY
Time Time of historical event in format HH:MM:SS
RPM Engine speed
Pwr Generator active power
PF Generator PF
LChr Character of the load
Gfrq Generator frequency
Vg1 Generator voltage L1
Vg2 Generator voltage L2
Vg3 Generator voltage L3
Ig1 Generator current L1
Ig2 Generator current L2
Ig3 Generator current L3
Mfrq Mains frequency
Vg1 Mains voltage L1
Vg2 Mains voltage L2
Vg3 Mains voltage L3
V Battery Battery voltage
OilP IL-NT Analog input 1 value ( default Oil pressure)
EngT IL-NT Analog input 2 value ( default Water temperature)
FLvl IL-NT Analog input 3 value ( default Fuel level)
AIM1 IG-IOM, IGS-PTM Analog input 1 value (when configured IG-IOM, IGS-PTM)
AIM2 IG-IOM, IGS-PTM Analog input 2 value (when configured IG-IOM, IGS-PTM)
AIM3 IG-IOM, IGS-PTM Analog input 3 value (when configured IG-IOM, IGS-PTM)
AIM4 IG-IOM, IGS-PTM Analog input 4 value (when configured IG-IOM, IGS-PTM)
BINARY
INPUTS
Binary inputs IL-NT
BIM IG-IOM, IGS-PTM Binary inputs (when configured IG-IOM, IGS-PTM)
BINARY
OUTPUTS
Binary outputs IL-NT
BOM IG-IOM, IGS-PTM Binary outputs (when configured IG-IOM, IGS-PTM)
FC ECU alarm FailureCode
FMI ECUalarm Failure Mode Identifier

ComAp InteliLite NT AMF Series Specifications

General

Brand	ComAp
Model	InteliLite NT AMF Series
Category	Controller
Language	English