ComAp InteliMains NT IM-NT-BB - Winscope; Websupervisor; Applications Overview

To Next Page

To Previous Page

InteliMains

, SW version 3.2.0

InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015

2.2.3 WinScope

Special graphical controller monitoring software. See

more in the WinScope Reference guide.

This tool provides the following functions:

 Monitoring and archiving of ComAp controller’s

parameters and values

 View of actual/historic trends in controller

 On-line change of controllers’ parameters for

easy regulator setup

2.2.4 WebSupervisor

Web-based system for monitoring and controlling ComAp controllers. See more at the WebSupervisor

webpage.

This tool provides the following functions:

 Site and fleet monitoring

 Reading of measured values

 Browsing of controller history records

 On-line notification of alarms

 E-mail notification

 Also available as a smartphone application

2.3 Applications overview

For detailed description of several possible applications using InteliMains

please refer to the

IGS-NT-Application Guide.

NOTE:

It is necessary to use power formats in MX when the sum of nominal power of gen-sets or any power

in the system (e.g. power imported from Mains) is expected to be above 32000 kW.