InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
12.1.6.3 Value: Max ROCOF
This is maximal measured value of ROCOF of the mains voltage. The value
is reset to 0 automatically at the moment of closing the MGCB.
12.1.7 Group: Power management
12.1.7.1 Value: TotRunPact
Sum of active power of all loaded gen-sets within the group that are
connected to the bus.
12.1.7.2 Value: TotRunPnomAll
Sum of nominal power of all loaded gensets within the group that are
connected to the bus (e.g. all gensets in logical group controlled by IM-NT or
in two logical groups linked by Group link). See also values TotAvlbPnom and
TotRunPnom.
For more information on power management please refer to the chapter
Power management.
12.1.7.3 Value: TotAvlbPnom
To Next Page
Loading...