InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
4.1.2 Modem connection
A modem connection can be realized by suitable modem connected to the controller. Figures below
illustrate the connection setting in GenConfig and InteliMonitor.
Select connected modem, adjust Phone number and enter CAN address and enter correct
Access Code for remote connection. Enter password (optional for locked configuration).
It is possible to adjust number of rings before the controller accepts the connection from modem – use
Comms settings:NumberRings AA.
To Next Page
Loading...