ComAp InteliMains NT IM-NT-BB - Group: Act. Calls;Sms

InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
286
Range [units]
[-]
Related FW
standard v3.1.0
Description
This setpoint adjusts the mode of the Timer channel #15. Output from this
channel is available in the combined output TimerAct 13-16.
NOTE:
See the chapter Timers for more details about timers.
11.2.14.16 Setpoint: Timer channel 16
Group
Timer settings
Range [units]
[-]
Related FW
standard v3.1.0
Description
This setpoint adjusts the mode of the Timer channel #16. Output from this
channel is available in the combined output TimerAct 13-16.
NOTE:
See the chapter Timers for more details about timers.
11.2.15 Group: Act. calls/SMS
11.2.15.1 Setpoint: History record
Group
Act. calls/SMS
Range [units]
DISABLED, ENABLED [-]
Related FW
standard v3.1.0
Force value
possible
YES
Description
This setpoint is used to enable sending SMS and/or e-mail alerts when a
"protection" configured as History record occurs. See the chapter Alarm
management for more information about protection types.
NOTE:
As the History record protection does not appear in the alarmlist, the SMS or
e-mail may contain empty alarmlist.